SKU: JSQ-SMT23121522ZP007-BB-2Pcs CS600 SensorThis site contains affiliate links for which we may be compensated
Sporting Goods / Cycling / Bicycle Electronics / Cycle Computers & GPS
Just switch the mode of Geoid CS600 sensor between cadence or speed by re-installing the battery.(Upgrade seal film: slot and contact optimization)
Geoid CS600 sensor can be connected to ANT+ cycling computer smart watch and app, while recording multiple copies of data and facilitate analysis
Geoid CS600 cadence speed sensor is compatible with most Bluetooth or ant+ standard protocol APPs or devices that support third-party brand connections, such as Onelap, Zwift, Rouvy, Peloton, Openrider, Cyclemeter, RidewithGPS, TrainerRoad, and Wahoo Fitness (But WAHOO APP can’t tracking 2 data in the same time even you have 2 sensors.)
Geoid CS600 sensor will automatically enter the sleep state for 1 minute to save power after the sensor is stationary, the sensor will ONLY start sending broadcasts after it is properly woken-up.
1 sensor can ONLY select one mode (Speed or Cadence) at the one time. So you need 2 sensors to test both speed and cadence. (1 for speed,1 for cadence)
Each CS600 sensor can process either speed or cadence but not both at the same time.
When using a smart phone APP, you need to search for the sensor in the APP, searching through the phone system’s Bluetooth setting is invalid.
Our sensor is a geomagnetic sensor, not suitable for spinning bike
Specifications Name Speed & Cadence Dual Mode Sensor Endurance 500 hours Waterproof IP66 Temperature -10-50℃ Cadence Range 30~180rpm Speed Range 5-85km/h Battery Type CR2032,V Weight 8.8g Sensor Dimensions 38.3*29.8*8.9mm Wireless Protocol ANT+ & Bluetooth Introduction
Returns Accepted for this item if it's within 30 Days